25
3.
Care, cleaning and maintenance
3. Care, cleaning and maintenance
Cladding:
Clean the boiler cladding with a moist cloth as needed. In the event of heavy soiling, use soapy water or diluted suds
(do not use strong cleaners or sharp cleaning instruments).
Coasting surfaces:
Every millimetre of soot on the coasting surfaces means about 5 % more fuel consumption. A clean boiler saves
fuel and protects the environment.
Save fuel – al
ways clean the boiler in good time!
3.1 During each fill:
3.1.1 Lever for cleaning heating surfaces
– Press lever for cleaning heating surfaces 5–10 times – Fig. 58.
Information!
The specified cleaning intervals are for guidance only! The cleaning intervals vary depending on
the quality of the fuel, the nature of operation and the different operating phases (e.g. a lot of par-
tial load, the blower spending a lot of time stationary during operations).
Fig. 58 Hebel-Heizflächenreinigung 5–10 x betätigen
3.1.2 Ignition openings on lighting door
1
and vertical grate
Check ignition openings on lighting door and vertical grate, clear if necessary – Fig. 59.
1 Only for LogWIN with automatic ignition (accessory).
Fig. 59 Checking ignition openings
Ignition opening on lighting door
Ignition opening on vertical grate
