Wincor Nixdorf CINEO C4080, Installation Manual

Page: 91 / 194

Installation Installation without frame
01750223447 D CINEO C4080 - Installation Guide
79
10
5a
5b
If the connecting cables on the site
are not located on the safe door
side:
Insert the data lines, the connecting
cable of the remote status indicator
(optional) and the power cord through
the cable lead-ins and if necessary
through the cable feed openings
behind the safe door side (10) of the
installation frame, as in the example
shown here.
Make sure that the connecting
cables are laid loosely and are
not crushed by the installation
frame.
4x
Push the installation frame onto the
threaded rods (1) as shown in the
illustration as an example.
Secure the installation frame using
one hexagon nut and one washer for
each of the 4 attachment points (2) (for
material see section "Mounting set").
i
If applicable, note the hardening
times of the mounting material.
The threaded rods must not
protrude beyond the installation
frame. If necessary, level the
threaded rods.