manualshive.com logo in svg

Wincor Nixdorf BEETLE F2-ULV-CPU, User Manual

Share
Download
Wincor Nixdorf BEETLE F2-ULV-CPU User Manual Download Page 48

F2 ULV-CPU 
 

42 

 

Legacy USB Support [Disabled] 

This motherboard supports Universal Serial Bus (USB) devices. The default of [Disabled]  the USB 
controller is disabled no matter whether you are using a USB device or not. The enabling of the con-
troller will run with the help of a USB compliant operating system like Windows XP or else. If the point 
stands on [Enabled] the legacy USB support from the BIOS is started. Now it is possible to use a USB 
keyboard to start this setup or with the standard DOS environment. If you like to use a USB-Floppy 
disk or a USB CD-ROM device for booting, you have to enable this setup point and after detecting of 
this USB device from the BIOS, you have to switch the boot order to the appropriate device.  
Configuration Options: [Disabled] [Enabled] 

Note: Selecting Legacy USB Support [Disabled] has impact on “Boot Order” in “BOOT” Menu, 
resetting this field do its default value and locking it. See “Boot Order” description. 

Internal LAN Controller [Enabled] 

This point switches physical on or off the Onboard LAN Controller. Configuration Options: [Disabled] 
[Enabled] 

Onboard LAN Boot Prom [Disabled] 

This point switches on or off the PXE PROM from the onboard LAN Controller. Configuration Options: 
[Disabled] [Enabled] 

QuickBoot Mode [Disabled] 

Allows the system to skip certain tests while booting. This will decrease the time needed to boot the 
system. Configuration options: [Enabled] [Disabled] 

Video output to COM3 [Disabled] 

Some systems may be configured without a full screen display, just using a small display connected to 
the COM3 serial port. [Enabled] will redirect diagnostic information during PowerOnSelfTest to this 
serial port, giving control about the system to smaller displays as well.  

Fan Control [Max Cooling] 

This setup mode will control the rotating of the PWM-Fans due to actual CPU-Temperature if setting 
to Automatic. With Max Cooling is the speed of the fans always high. Configuration Options: 
[MAX Cooling] [Automatic] 

 

Summary of Contents for BEETLE F2-ULV-CPU
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands