manualshive.com logo in svg

Wincor Nixdorf BEETLE F2-ULV-CPU, User Manual

Share
Download
Wincor Nixdorf BEETLE F2-ULV-CPU User Manual Download Page 21

F2 ULV-CPU 

 

 

15 

 

USB Interface  

 

The USB interface supplied by the ICH6M contains one EHCI controller with 8 downstream 
ports providing high speed data rate (480Mb/sec, USB 2.0) and 4 UHCI controllers (2 ports 
each) for full and low speed data rate (12 Mb/sec and 1.5Mb/sec, USB1.1). 
 
USB ports 1 and 2 are available on the main board.  
The USB connector is type Stack A.  
 
USB ports 3, 4 and 5 are available if one of the Power USB modules (12V or 24V) is used 
(USB3plus, USB4plus, and USB5plus).  
Connectors (i.e. type BERG 74239-x00) are assembled on the Power USB modules. 
 
USB ports 6 (for uDoc), 7 and 8 are available on 1 x 6 pin headers. Connection to the rear - or 
front side of the BEETLE- system requires a special cable. 

Hard Disk Interface Serial ATA (SATA) 

There are two Serial ATA Ports with 1.5 GB/s, (Type 1) available. 

IDE Interface 

The CPU features a UDMA IDE interface for connecting up to 2 ATA compatible drives. The 
I/O addresses meet the AT standard. The connector on the CPU is the Standard 22-pin 
header (2-mm arrangement) for connecting a CD-ROM or DVD drive. All parameters of the 
drives are read by the BIOS automatically and stored in the BIOS setup parameter set. 
The F2- CPU supports IDE drives up to PIO-Mode 4 and UltraDMA Mode 2. 

Speaker 

The CPU is equipped with control logic circuitry for a speaker. The volume of the speaker may 
be defined in the BIOS Setup. It may be set to high, medium or low; the default setting is high. 
The speaker itself is located in the housing of the BEETLE system.  

Summary of Contents for BEETLE F2-ULV-CPU
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands