WilTec 50790, Manual

Page: 22 / 43

© by WilTec Wildanger Technik GmbH Seite 22
http://www.wiltec.info
Operator Controls (continued)
Tilt Latch
To allow the cradle to tilt (for
loading a dry wall panel, or for
raising the pane! to a side wall or
sloped ceiling); or to remove the
cradle from the frame, pivot the
tilt latch out and down. To lock
the cradle onto the frame without
tilting, pivot the latch up to en-
gage the stud on the cradle.
NOTE: When it is in the level
(non-tilted) position, the cradle
will also tilt up to 10° side-to-side.
Brake Arm
A spring-loaded brake holds the
cradle at whatever height you
raise it by cranking the winch
wheel. To lower the cradle, con-
trol the backward rotation of the
winch by grasping the wheel
handle as you carefully raise the
brake arm to release the brake.
Winch Wheel, Handle, and
Post
Cranking the winch (using the
wheel handle) coils or uncoils the
cable that raises or lowers the
cradle.
Grasp the post for leverage when
cranking the winch.
Retaining Hook
The retaining hook secures the
telescoping sections inside the
frame, for transport and storage.