3
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
4
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
Typical Installation
Signal
Booster
Lightning
Surge Protector
(Recommended)
Outside
Antenna
(Wide Band
Antenna option
shown)
Inside Panel
Antenna
AG DB Pro Installation Diagram
Inside Panel
Antenna
Before Getting Started
This guide will help you properly install your Wilson Electronics Signal
Booster .
It is important to read through all of the installation steps
for your particular application prior to installing any equipment.
Read through the instructions, visualize where all the equipment will
need to be installed and do a soft installation before mounting any
equipment . Contact Wilson Electronics Technical Support Team with any
questions at: 866-294-1660 .
2-way/3-way/
4-way splitter
(if using multiple
Inside Antennas)
(Optional third
antenna for
additional
coverage).
Null Zone: The area under the
Outside Antenna, where the
Outside Antenna radiates the
least .
Note: The Inside Panel Antenna
may be mounted on the wall
directly under the Outside
Antenna if 20 feet of
vertical
separation can be maintained.
The preferred method for the best
coverage, place the antenna in
the ceiling.
Note: A Lightning Surge Protector
is recommended for all building
installations (sold separately). Make
sure the protector is installed in line
between the Outside Antenna and
the Signal Booster.
Surge Protector
Powerstrip
Power
Supply
(Optional
second
antenna for
additional
coverage).
