5
6
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Mon.- Fri. Hours: 7 am to 6 pm MST.
Selecting a Direction for the Outside Antenna
Before selecting a location on the roof of the building to install the Outside
Antenna, refer to page 7 for additional instructions . Use a cell phone in test
mode to find the strongest signal from the cell tower (refer to page 5 for more
information) . To get the strongest signal possible, it is very important to set
up your Outside Antenna properly . The Inside and the Outside Antenna must
be mounted in such a way that they are able to pick up the best possible cell
signal on the outside of the building and provide the best possible signal on
the inside of the building . Mount the Outside Antenna as high as possible
facing the cell tower in an area with the best possible signal coverage .
Note:
Never point the front of a directional antenna toward the Inside
Antenna. See Figures 1 & 2 on page 10.
-50dB
-60dB
-70dB
-80dB
-90dB
-100dB
-110dB
EXCELLENT
GOOD
POOR
NO
SIGNAL
Signal Strength Graph
Cell Tower
Cell Signal
Outside
Wide Band
Antenna
Signal readings usually appear as a negative number (for example, -86) .
The closer you get to zero the stronger the signal . (Refer to graph below) .
