Installation and electrical connection
en
Installation and operating instructions Wilo-EMU TR/TRE 212 ... 326-3
21
Lift the mixer and swivel it over the basin
1
2
7
9
±0
Fig. 5: Swivel the mixer over the basin
1
Hoisting gear
2
Lifting equipment
7
Frame
9
Guide pipe for lowering device
‡
Preparatory tasks completed.
1. Lift mixer so that it can be swivelled safely over the railings.
NOTICE! The mixer must be suspended horizontally with the hoisting gear. If the
mixer hangs at an angle to the hoisting gear, adjust the attachment point on the
frame.
2. Pivot the mixer over the basin.
NOTICE! The frame must be perpendicular to the guide pipe. If the frame is not
perpendicular to the guide pipe, adjust the reach of the hoisting gear.
Mounting the mixer on the lowering device
7
9
10
Fig. 6: Mixer on the lowering device
7
Frame
9
Guide pipe for lowering device
10
Upper holder of the lowering device
‡
Mixer hangs horizontally.
‡
Frame perpendicular to the guide pipe.
‡
Cable bracket mounted on the edge of the basin.
1. Slowly lower the mixer.
2. Insert the guide pipe in the frame without tilting.
NOTICE! The guide rollers are in contact with the guide pipe.
3. Version with quick-release axles:
Lower mixer until the frame is below the upper holder. Install the quick-release
axles and plastic rollers and secure them with linchpins!
