- 6 -
3.3
Safety consciousness on the job
The safety instructions included in these installation and operating instructions and the
existing national regulations for accident prevention together with any internal working,
operating and safety regulations of the operator are to be complied with.
3.4
Safety instructions for the operator
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instructions concerning the use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and maintenance shall not be carried
out by children without supervision.
• If hot or cold components on the product/unit lead to hazards, local measures must be
taken to guard the components against touching.
• Guards protecting against touching moving components (such as the coupling) must not
be removed whilst the product is in operation.
• Leakages (e.g. from the shaft seals) of hazardous fluids (which are explosive, toxic or hot)
must be led away so that no danger to persons or to the environment arises. National
statutory provisions are to be complied with.
• Highly flammable materials are always to be kept at a safe distance from the product.
• Danger from electrical current must be eliminated. Local directives or general directives
[e.g. IEC etc.] and instructions from local power supply companies must be adhered to.
3.5
Safety instructions for installation and maintenance work
The operator must ensure that all installation and maintenance work is carried out by
authorised and qualified personnel who are sufficiently informed from their own detailed
study of the operating instructions. Work on the product/unit must only be carried out
when it is at a standstill. It is mandatory that the procedure described in the installation and
operating instructions for shutting down the product/unit be complied with. Immediately
on conclusion of the work, all safety and protective devices must be put back in position
and/or recommissioned.
Summary of Contents for PW BOOST INITIAL 250EA
Page 75: ......
