en
Installation and operating instructions • Wilo-DrainLift BOX • Ed.06/2022-10
39
DrainLift BOX-40...DS
DrainLift BOX-32...DS
Fig. 4:
Position of the pumps, with switchgear
Checking the setting on the level control device
CAUTION
Incorrect alignment of the float switches may lead to malfunc-
tion!
To function properly, the float switches must have sufficient space to
float and lie flat on the surface of the water. Therefore, ensure correct
alignment of the pumps and floaters!
The level control device is factory-mounted and factory-set. The level control device may
slip from its mount during transport and lead to malfunction of the lifting unit. Therefore,
check the attachment and the cable length of the float switches prior to installation and
adjust if necessary.
Single- and double-pump system without switchgear
190 mm 7
.5 in
225 mm
8.86 in
69 mm 2.72 in
Fig. 5:
Attaching and setting the float
switches, without switchgear
•
DrainLift BOX-32/..
–
Level measurement is conducted by the pump’s attached float switch.
–
The float switch cable is fixed to the pump’s cable terminal.
–
The length of the cable defines the switching level.
•
DrainLift BOX-40/..
–
Level measurement is conducted by the pump’s attached float switch.
–
The float switch cable is attached to the pump motor via a cable clamp and a hose clip.
–
The length of the cable defines the switching level.
Double-pump system with switchgear
190 mm
7.5 in
1
2
4
3
6
3
5
6
Fig. 6:
Attaching and setting the float
switches, with switchgear
1
Float switch for level control
2
Attached float switch, fixed in the “ON” position
3
Float switch holder
4
Float switch cable attachment point
5
Discharge pipe
6
Float switch holder attachment
The level is recorded by a separate float switch. The float switch is attached to the float
switch holder, while the float switch cable is attached to the cross brace of the float switch
holder:
•
Wilo-DrainLift BOX-32/... DS:
–
The float switch is attached to the pump’s cable terminal.
–
The pump’s attached float switch must be fixed in the “ON” position.
–
The float switch holder is attached towards the pipework!
•
Wilo-DrainLift BOX-40/... DS:
–
The float switch holder is attached towards the middle of the tank!
Summary of Contents for DrainLift BOX
