en
36
Installation and operating instructions • Wilo-DrainLift BOX • Ed.06/2022-10
–
Tank cover with tile frame and floor drain
–
Shell cover
•
Floor-mounted installation
–
Tank cover (cover plug)
–
Fixation material for buoyancy safeguards
•
Installation and operating instructions
DrainLift BOX ... D
•
Plastic chamber with installed pipework
•
Pipework with non-return valve and Y-piece
•
Two pumps with float switch and plug
•
Pressure hose (inside diameter: 40 mm/1.5 in) incl. hose clips
•
O-ring to seal tank cover and as anti-syphon trap
•
Concealed floor installation
–
Tank cover with tile frame and floor drain
–
Shell cover
•
Floor-mounted installation
–
Tank cover (cover plug)
–
Fixation material for buoyancy safeguards
•
Installation and operating instructions
DrainLift BOX ... DS
•
Plastic chamber with installed pipework
•
Pipework with non-return valve and Y-piece
•
Two pumps with plug
•
Pressure hose (inside diameter: 40 mm/1.5 in) incl. hose clips
•
O-ring to seal tank cover and as anti-syphon trap
•
Concealed floor installation
–
Tank cover with tile frame and floor drain
–
Shell cover
•
Floor-mounted installation
–
Tank cover (cover plug)
–
Fixation material for buoyancy safeguards
•
Switchgear with float switch and plug
•
9 V rechargeable battery
•
Installation and operating instructions
4.8
Accessories
•
Collar − to stop ground water from seeping into the concealed floor installation.
•
Alarm switchgears − to detect leakages.
•
Float switch − to detect high water levels.
•
Diaphragm pump − for emergency draining.
•
Stop valve
5
Transportation and storage
5.1
Delivery
•
After receiving the shipment, check it immediately for defects (damage, completeness).
•
Defects must be noted on the freight documentation.
•
Defects must be notified to the transport company or the manufacturer on the day of
receipt of shipment.
•
Subsequently notified defects can no longer be asserted.
5.2
Transport
•
Wear protective equipment! Observe the work regulations.
–
Protective gloves: 4X42C (uvex C500 wet)
–
Safety shoes: Protection class S1 (uvex 1 sport S1)
•
Transport product on a pallet or at the pipe sockets.
•
Only lift the product by the tank (pipe sockets)!
–
The product will be damaged if lifted by the discharge port or the connection pipes.
•
Units weighing 50 kg (110 lbs) and over must be transported by two persons.
•
Always set the product down vertically on the pallet.
•
Secure the product against slipping. When lashing, make sure that the plastic parts do
not deform.
•
Protect attached switchgears and plugs from water ingress.
•
To avoid damage to the pipework and pipe adaptors, always keep the product vertical
during transport.
Summary of Contents for DrainLift BOX
