en
30
Installation and operating instructions • Wilo-DrainLift BOX • Ed.06/2022-10
Residual-current device (RCD)
•
Install a residual-current device (RCD) in accordance with the
regulations of the local energy supply company.
•
If people can come into contact with the device and conductive
fluids, install a residual-current device (RCD).
2.5
Transport
•
Locally applicable laws and regulations on work safety and ac-
cident prevention must be complied with.
•
Transport product on a pallet or at the pipe sockets.
•
Only lift the product by the tank (pipe sockets)!
–
The product will be damaged if lifted by the discharge port or
the connection pipes.
•
Units weighing 50 kg (110 lbs) and over must be transported by
two persons. It is generally recommended that two persons
transport the unit.
•
If lifting equipment is used, observe the following points:
–
Lifting gear: Transport strap
–
Number: 2
–
Attachment point: Pipe socket
–
Ensure that the lifting gear is securely attached.
2.6
Installing/dismantling
•
Locally applicable laws and regulations on work safety and ac-
cident prevention must be complied with.
•
Disconnect device from the mains and secure it against being
switched on again without authorisation.
•
Close the inlet and pressure pipe.
•
Ensure enclosed spaces have sufficient ventilation.
•
When working in enclosed spaces, a second person must be
present for safety reasons.
•
Toxic or asphyxiating gases may build up in enclosed spaces or
buildings. Observe protective measures in accordance with
work regulations, e.g. carry a gas detector with you.
•
Clean the device thoroughly.
WARNING! Risk of fire if inappropriate clothing is worn and
highly flammable cleaning agents are used!
Static charging may occur when cleaning plastic parts. There is
a risk of fire! Only wear anti-static clothing and do not use
highly flammable cleaning agents.
2.7
During operation
•
Open all gate valves in the inlet and pressure pipe!
•
The maximum inflow must be lower than the maximum output
of the system.
•
Do not open the inspection openings!
•
Ensure aeration and venting!
2.8
Maintenance tasks
•
Maintenance work may
only
be carried out by qualified person-
nel (trained specialists in plant technology for sanitary facilit-
ies).
Summary of Contents for DrainLift BOX
