14
12) At the rear of the keel, tension the crossbar by pulling on the top portion of the 4mm
accessory cord which passes through the white pulley on the rear of the sweep wire keyhole
channel. Drop the keyhole channel all the way down over the head of the keyhole bolt, and
let it slide forward into the locked position.
STOP: Never install the keyhole channel onto the keyhole bolt without making
absolutely sure that the channel is fully engaged on the narrow neck of the bolt
and slid forward into the fully locked position. An inflight disengagement of this
attachment will cause a complete loss of structural support of the glider and a
total loss of control.
13) Remove the wingtip protector bags, and remove the plastic wingtip fairings from inside
the bags. Install the last two curved battens on each side.
