36
Annotation Pro & Annotation Pro Plus
Activate the
Clear
command for your particular controller. All markers disappear. An active pointer remains on
screen unless the pointer has been disengaged.
Undoing a Marker
To undo a marker, beginning with the most recently anchored marker or line segment. You can repeat this command
as often as needed until the screen is clear of markers.
When you are in Undo Mode, you cannot erase markers.
Activate the Undo command for your particular controller. The most recently anchored marker disappears. An active
pointer remains on screen unless the pointer has been disengaged.
Erasing Markers
Follow these instructions to erase markers from the overlay, wiping them clear like a traditional eraser. You activate
Erase mode from the menu system, but you erase the markers using your drawing device.
When you are in Erase mode, you can no longer undo markers.
Activating Erase Mode
From the Main Menu
1. Activate the menu system. The Main Menu appears
.
2. Select the
Annotation
option. The Annotation menu appears
.
3. Select
Erase Method.
The Erase Method menu appears.
Erase Method Menu
4. Select an
eraser size:
Small, Medium, or Large.
NOTE: The larger the eraser size, the more area you can clear in a single motion. If you do not select an eraser size, the
Annotation Pro will default to Medium.
5. Exit the menu system.
Erasing
Be sure you are in Erase mode before following these steps. See Activating Erase Mode for instructions.
1. After marking, activate the
Undo/Erase
command for your particu lar controller. A square eraser appears on
screen, ready for positioning.
2. Activate the
Draw
command, and drag the eraser over the markers. The markers disappear as you wipe. When
you lift the drawing device, the Annotation Pro closes the eraser function, and enters Marking Mode. If you need
to erase again, repeat these steps.
