Will Burt Inflexion Plus 1.8, Operating Instructions Manual

Page: 54 / 104

PAGE 52 OF 102
INFLEXION PLUS
OPERATING INSTRUCTIONS
TP-5211901-C
JUNE 2021
6.4 Operating the Positioner
The positioner can be operated when the mast is in the 90° position, partially extended, or fully
extended.
To pan and tilt the positioner:
• Press the Pan Right button to pan the positioner to the right.
• Press the Pan Left button to pan the positioner to the left.
• Press the Tilt Up button to tilt the positioner up.
• Press the Tilt Down button to tilt the positioner down.
The positioner will continue to move in the direction given by the HHRC until the button is
released or the positioner reaches one of its limits. Note that the positioner motor and gearbox
assemblies are designed to be stalled when they hit an obstruction, but that continued abuse will
cause damage.
The positioner can also go to the preset stow and unstow positions. The stow positions ships
from the factory set to a default position. The optional unstow position does not ship with a
default position, and can be set by the customer.
To go to a preset position:
• Press the Lights button to go to the unstow position. When moving to the unstowed position,
the positioner will tilt and then pan.
• Press the Auxiliary Lights button to go to the stow position. When moving to the stowed
position, the positioner will pan and then tilt.