Page 23
Step 30:
Stand the Bed face unit up
on its Inner Side Rail. Now with you
and your assistant on either side of
the Bed unit lift until the # 3 bolt on
the Head/Foot Rail is a few inches
above the slotted end of the Tension
Arm on both sides. Gently lower the
Bed Face unit between the Tension
Arms and seat the # 3 bolt into the
slot at the end of the Tension Arms.
Now start pulling the bed face unit
down and away from the Bed Cabinet
the Allen Head bolt will naturally
seat into the notch at the lower end
of the Tension Arms. Lower the bed
unit down and extend the Legs so that
they are on the floor. Someone will
need to hold the bed unit down as it
will want to rise.
IMPORTANT!
As instructed in step 25, Bolt #3 should be loose enough to slip into
the notch at the end of the Tension Arm See illustration below.
Bed Face
#3 Bolt head
Allen Key bolt head
Lift Arm
Head Rail
