1/2 Turn to tight
Cam Fitting
Connecting Bolt
Working with Cam Fittings
In the next steps you will work with Cam Fittings and Connecting Bolts in
attaching cabinet parts together. Take a minute and review this information
for ease of assembly.
- Slide the Cam Fitting over Connecting bolt.
- Hold parts snug together.
- Turn Cam Fitting 1/2 turn clockwise with a manual
screw driver. DO NOT USE POWER SCREW DRIVER.
Step 7 :
Locate the Front Stretcher and Base and remove the three wing nuts and sepa-
rate the two pieces.
Note: Thread the Wing nuts back onto
the base mold to avoid misplacing
them.
Base
Front Stretcher
Page 10
