Hardware and parts needed for next steps
Wood Mattress
Support
X 2
X 2
1 1/4” Square drive
Wood screw
5/8” Square Pan head screw
(Hardware pack #7)
Square Tip Bit
X 1
Metal Center Stiffeners
Step 22:
Position the Wood Mattress Supports evenly over the Face Panel
seams allowing their ends to over lap the Outer and Inner Rails. Use the 1 1/4”
wood screws through the holes provided in the Mattress Support to mend the
Face Panels together. DO NOT STRIP SCREWS.
Helpful hint: Mattress Supports may have an area cut
out to allow for the bed handle holes.
Step 23:
Position the 2 Metal Stiffeners evenly in the space provided be-
tween the outer and center Wood Mattress Supports as illustrated below. Now
use the 5/8” square drive screws to fasten the Stiffeners to the Face Panels.
DO NOT STRIP SCREWS.
Page 19
(From Manila Envelope)
(From Manila Envelope)
Wood mattress
supports positioned
evenly over seems
Inner Rail
Outer Rail
Holes or
Cut out to
provide
opening
for handle
holes
Metal Center Stiffeners
1 1/4” Square drive
Wood screw
5/8” Square Pan
head screw
BIRDS EYE (TOP) VIEW
1 1/4” Square drive
Wood screw
Holes or
Cut out to
provide
opening
for handle
holes
