Locate and Identify the Following Parts
(7 Cam Fittings are Pre installed)
Grommet Hole
7.5”
Head Board Bottom
-Board 7.5” wide (length depends on size of the bed).
-2.3/8” Grommet hole in the center of the board.
-7 Pre-installed Cam Fittings.
Identifiers
(4 Cam Fittings are Pre installed
in each)
5”
-Boards are 5” wide (length depends on size of the bed).
-4 Pre-installed Cam Fittings per Stretcher 2 on either end.
Identifiers
Rear Stretcher
6.75”
Hinged Storage Door
(4 Cam Fittings are Pre installed.
Notch
Hinged doors
-Three hinged doors.
-Notch in the door support.
-4 Pre-installed Cam Fittings.
Identifiers
Grommet Hole
23.75”
Bridge Board
-Solid wood Anchor Board.
Identifiers
-23.75” wide (length depends on size of the bed).
Solid wood
Anchor Board.
5mm holes on
three sides.
-5mm holes on three sides.
15”
(6 Cam Fittings are Pre
installed)
5mm holes along edge.
-3 - 5mm holes along one edge.
Identifiers
-Black Barrel
Black Barrel
-15” wide (length depends on size of the bed).
Head Board
Base
Front Stretcher
Front Stretcher and Base
Two Boards connected together
via 3 wing nuts.
Identifiers
Page 8
