BIRDS EYE (TOP) VIEW
Page 18
Frame positioned evenly side to side with wood
face panels protruding by approximately 1” on
either side.
Inner Rail
Outer Rail
Frame inner rail is
flush with face panels
Handle Holes
Head/Foot
Rail
Head/Foot
Rail
Handle Holes
Step 21:
Center the assembled frame side to side on the Face Panels (leaving ap-
proximately 1” space on either side) and bring the Inner Rail flush to the end of the
Face Panels. Once the frame is positioned correctly and the panels and rails are even
and square to each other use 2 screws (5/8 ”square drive) in each corner, as well as
one in each panel at the Inner and Outer rail to hold assembly in place. With the rails
held in place, Use the 5/8” screws in each of the remaining holes around the frame.
Caution: DO NOT STRIP SCREW!
Hardware and parts needed for next steps
X Approx. 118
5/8” Square Pan head screw
(Hardware pack #7)
OR
5/8” Pan head screw
(Hardware pack #7)
X Approx. 118
(Hardware type varies)
