25
WIKA operating instructions, model CTH6200
EN
2146872.02 07/2021 EN/DE
6. Commissioning, operation
The transmission is protected against transmission errors by extensive safety
mechanisms (CRC).
Our GSoft data logger evaluation software is available for this purpose.
GSoft data logger evaluation software
The GSoft data logger evaluation software is used to display the logger data from the
model CTH6200 hand-held thermometer on a PC in tabular form and as a chart.
■
Easy operation with self-explanatory toolbars
■
Data from the pressure and temperature hand-helds can be displayed in a single chart
(two separate y-axes)
■
Chart offers a zoom function
■
Operation of the logger function via PC (remote control)
■
Data can be exported (Excel
®
, etc.)
■
Languages: German, English, French, Spanish and Czech
System requirements, GSoft version 3.2
■
IBM compatible PC (Pentium
®
)
■
At least 20 MB free hard disc space
■
CD-ROM drive
■
At least 32 MB RAM
■
Windows
®
operating system 95, 98, NT 4.0 (with Service Pack 3.0 or higher), 2000,
XP, Vista 7, 8, 8.1 or 10
■
Mouse
■
USB port (via interface cable)
Further information on the GSoft data logger evaluation software can be found in the
instructions.
6.3.9 Analogue output scaling with
dAC
.
0
and
dAC
.
1
(
dAC
.)
WARNING!
Damage to property through incorrect measuring instruments
By using incorrect measuring instruments, this damage could occur to the
hand-held.
▶
Only connect passive voltmeters to the analogue output.
Analogue output cannot be used during logger recordings.
With
dAC
.
0
and
dAC
.
1
the analogue output can be easily scaled.
▶
It must be ensured that the analogue output is not loaded too heavily, otherwise the
output value can be corrupted and the current supply of the instrument increases
correspondingly.
