28
WIKA operating instructions, model CTH6200
EN
2146872.02 07/2021 EN/DE
6. Commissioning, operation
6.4.1 Manual recording (
Func-Stor
)
Manual recording of measured values
Each time the
[STORE/QUIT]
button is briefly pressed, a measuring result will be
recorded. The data recorded can be viewed either on the display (an additional menu
item
“
REAd-Lo66
“
is displayed when accessing the configuration menu) or through the
serial interface in a PC (GSoft).
Storable data sets: 99
A data set consists of (max.):
■
Measured value at that data point
■
Time and date stamp at that data point
With each recording, “
St
.XX” will be displayed briefly. XX represents the
number of the measuring result.
Logger memory is full
If the logger memory is full, the display will show:
Manual recording/Reviewing individual values
In contrast to the cyclic logger function, individual values can also be viewed directly in
the display:
1. Press the
[SET/MENU]
button for 2 seconds.
⇒
“
rEAd-Lo66
”
will be shown in the display.
⇒
“
rEAd-Lo66
”
is displayed only if data sets have already been saved! Without any
data sets, the
“
SEt-ConF
”
configuration menu is displayed
2. With the
[▶/TARA]
button, the last measuring result is displayed.
⇒
Changing between measured values and date+time-display for the data set
3. With the
[MIN/▼]
or
[▲/MAX]
buttons, recall some further measuring results.
4. With the
[STORE/QUIT]
button, exit the menu.
5. Press
the [SET/MENU]
button.
⇒
Return to main menu.
Clear manual recording/stored data
If the data has already been saved, this can be cleared via the
[STORE/QUIT]
button:
1. Press the
[STORE/QUIT]
button for 2 seconds.
⇒
The main menu
“
CLr
.”
is accessed.
2. With the
[MIN/▼]
or
[▲/MAX]
button, select the desired function.
