22
WIKA operating instructions, model CTH6200
EN
2146872.02 07/2021 EN/DE
6. Commissioning, operation
Menu Para-
meter
Values
Meaning
[MENU]
▶
▲
or
▼
SEt
Lo66
Set Logger: Logger function configuration
1)
Func
CYCL
Cyclic: Logger function “cyclic logger”
Stor
Store: Logger function “individual value logger”
oFF
No logger function
CYCL
0
:
01
...
60
:
00
Cycle time for cyclic logger [minutes:seconds]
SEt
CLOC
Set clock: Setting of real-time clock
CLOC
HH:MM
Setting the time hours:minutes
YEAr
YYYY
Setting the year
dAtE
TT.MM
Setting the date day.month
1) If there is data in the logger memory, these menu items cannot be accessed. If these should be changed, the data must first be
deleted (see chapter 6.4 “Operation of the logger function”).
2) If an alarm function limit is crossed (over or under), this is signalled by a “hooting” and a beeping.
If the
[SET/MENU]
and
[STORE/QUIT]
buttons are pressed together for
longer than 2 seconds, the factory settings will be restored.
6.3 Configuring the instrument
To change settings, press the
[SET/MENU]
button. All important parameters for the
measurements are changed here.
Settings are made as follows:
1. Press the
[SET/MENU]
button for 2 seconds.
⇒
The main menu
“
SEt
”
is accessed.
2. Keep pressing the
[SET/MENU]
button until the desired function is displayed.
3. With the
[▶/TARA]
button, select the parameters.
4. With the
[MIN/▼]
or
[▲/MAX]
buttons, set the parameters.
5. With the
[STORE/QUIT]
button, confirm the entry.
6. Press the
[SET/MENU]
button.
⇒
Return to main menu.
6.3.1 Temperature unit (
Unit
)
The measured temperature can be displayed either in °C or in °F.
6.3.2 Display resolution (
rES
)
The default setting is
'
Auto
'
, i.e. the instrument automatically switches to the most
favourable resolution. Either 0.1 °C/°F or 0.01 °C/°F, depending on the current
temperature to be measured.
