27
WIKA operating instructions, model CPH62I0
11221801.02 02/2011 GB/D/F/E
GB
6. Commissioning, operation
clear all data points
clear nothing (cancel menu)
clear the last data point
Use the
´MIN´
or the
´MAX´
key to display the required option. The
´STORE/QUIT´
key
selects that choice.
If the logger memory is full, the display will show:
6.4.1 “Func-Stor“: Storing discrete measurements
In this mode, each time the
´Store/Quit´
key is pressed a measurement and its time
stamp will be recorded. The data recorded can be viewed either on the display (an
additional menu item “REAd-LoGG“ is displayed when scrolling through the configura
-
tion menu) or through the serial interface and a PC running the GSoft software.
Max. number of measurements: 99
The data recorded includes the following values:
■
Sensor 1: instantaneous value at that data point
■
Sensor 1: Min-Peak, Max-Peak since last data point
■
Sensor 2*: instantaneous value at that data point
■
Sensor 2*: Min-Peak, Max-Peak since last data point
■
Instantaneous difference (Sensor 1 - Sensor 2)*: at that data point
■
Min-Peak, Max-Peak of the difference (Sensor 1 - Sensor 2)*: Min-Peak, Max-Peak
since last data point
■
Time and date stamp of that data point
* Only for 2-channel version CPH62I0-S2
After each recording “St. XX“ will be displayed for a short time. XX represents the
number of the data point.
If the logger memory already contains data:
When the
´STORE/QUIT´
key is pressed for 2 seconds, the option to clear the logger
memory will be displayed:
Summary of Contents for CPH62I0-S1
Page 44: ...44 WIKA operating instructions model CPH62I0 11221801 02 02 2011 GB D F E GB...
Page 85: ...85 WIKA Betriebsanleitung Typ CPH62I0 D 11221801 02 02 2011 GB D F E...
Page 86: ...86 WIKA Betriebsanleitung Typ CPH62I0 D 11221801 02 02 2011 GB D F E...
Page 122: ...122 WIKA mode d emploi type CPH62I0 F 11221801 02 02 2011 GB D F E...
