18
WIKA operating instructions, model CPH62I0
11221801.02 02/2011 GB/D/F/E
GB
6. Commissioning, operation
1
2
3
4
5
5
6. Commissioning, operation
6.1 Operator panel and basic operation
On turning the device on,
if the logger function is selected, the integrated clock‘s time
will be displayed briefly. If a zero point adjustment has been carried out, the display will
indicate this by showing “nuLL-Corr”.
After changing the battery
the menu for setting the clock is activated automatically
(‘CLOC’). Check the clock and adjust if necessary (see chapter “6.3.11 (CLOC) Real
time clock“).
1. ON/OFF
2. SET/MENU:
Enter configuration menu
3. TARA:
Activate tare function, zero point adjustment
4. STORE/QUIT:
Activate hold function or logger function
(see chapter “6.4 Operation of logger”)
5. MIN/MAX:
Display the respective min-/max-memory value
Max-Function:
Pressing
´MAX´
shows the maximum measured value recorded.
Pressing it again hides it. To clear the max-memory press the
´MAX´
key for > 2 seconds.
Min-Function:
Pressing
´MIN´
shows the minimum measured value recorded. Press-
ing it again hides it. To clear the min-memory press the
´MIN´
key for >
2 seconds.
Hold-Function:
By pressing
´STORE/QUIT´
the instantaneous measured value will
be shown in the lower display. Pressing it again hides it. (Only when
logger = ‘off‘ is selected in the main menu).
Logger-Functions:
Activated by the
´STORE/QUIT´
key, only if the logger has been
selected via the main menu (see chapter “6.4 Operation of logger”).
Tare-Function:
By pressing
´TARA´
, the display will be set to 0. All measurements
from then on will be displayed relative to the set tare value. When the
tare function is activated, the arrow
´TARA´
appears in the display. To
deactivate the tare function press
´TARA´
for > 2 seconds.
Summary of Contents for CPH62I0-S1
Page 44: ...44 WIKA operating instructions model CPH62I0 11221801 02 02 2011 GB D F E GB...
Page 85: ...85 WIKA Betriebsanleitung Typ CPH62I0 D 11221801 02 02 2011 GB D F E...
Page 86: ...86 WIKA Betriebsanleitung Typ CPH62I0 D 11221801 02 02 2011 GB D F E...
Page 122: ...122 WIKA mode d emploi type CPH62I0 F 11221801 02 02 2011 GB D F E...
