Wifi-soft Solutions Unibox, User Manual

Page: 72 / 260

3.2.3 Delete AP Configuration
This page deletes an existing Access Point from the management list. All the information about the AP
including the configuration information and monitoring will be lost. Please note that this will not change any
settings on the AP and the AP will continue to operate on the last known configuration.
Click on the ‘delete’ icon, in the ‘Operations’ column, to delete an existing AP configuration. Once clicked, a
message asking for the confirmation of the delete operation pops up.
If you are sure, go ahead and click on the ‘Delete’ button.
3.2.4 Auto Discover AP
This page displays the list of APs that UniBox has auto-discovered and have not been provisioned for
management. All managed UniMax access points use a special protocol to advertise their presence on the
network. UniBox discovers the UniMax APs and checks whether they are already added for management.
If the APs are not managed, UniBox will display them in the list. An admin can review the APs and can
provision them for management.
This page displays all the APs which are under Unibox but not authenticated and provisioned for
Management. The list displays the IP Address, MAC Address, Vendor Name, Last Check-in Time and the
status. To add, click on ‘
+
’ button.
3.2.5 Import AP
Fig
Fig