Page 18
Deck oven
The device may be moved in conjunction with the combined
installation by a maximum distance of three metres for servicing,
maintenance and cleaning purposes.
Only transport the combined installation in conjunction with the
transport pallet and with a suitable lifting truck.
CAUTION
Danger of tilting
through overload-
ing!
Transport the entire combined installation to the location and position of assembly.
If the combined installation cannot be transported to the premises in its entirety, it is necessary to dis-
mantle the individual units from the combination. Unpack the combined installation.
When unpacking the appliance, comply with all the instructions in the chapter „Unpacking“.
3.2. Unpacking the device/combined installation
The device‘s door is made of glass and there is a risk of glass
breakage. Carefully check for any glass damage when unpack-
ing and wear appropriate protective gloves to prevent cuts.
The device/combined installation is packed onto a transport pallet at the factory.
Remove all fi lm and cardboard packaging.
Depending on the transport pallet, this :
a) disposable pallet => will be disposed of,
b) special pallet => will be returned to the factory.
Dispose of the packaging material in an environmentally friendly way.
3.3. Dismounting/mounting the combined installation
If the combined installation cannot be transported to the premises in its entirety, it is necessary to dis-
mantle the individual units from the combination.
This manual provides examples for safe and quick dismantling.
Of course not every case or eventuality can be shown in detail.
Nevertheless, even in special cases all important safety instructions should be observed.
Disassemble the waste water / exhaust air pipes.
Lift the individual components off the combined installation.
Use suitable support materials when lifting and carrying the individual units.
For example a scissor lift, a lifting truck with narrow forks, carrying straps, a carrying aid, lashing
straps.
