Wiesemann & Theis 57601 Manual Download Page 34

Page: 34 / 70

W&T

3.2.12 Enable

Here the global functions of the device are activated and deac-
tivated:

Update Enable

for the update port can be turned on or off. If it

is activated, it is possible to load the firmware update into the
device. Regardless of this setting the Web-IO 8x Thermometer
can be opened for an update under „LogOut -> Firmware Up-
date“.

Mail Enable

Activates or deactivates the e-Mail function

SNMP Enable

Activates or deactivates the SNMP function

UDP Enable

Activates access to the temperature via UDP.

GET Single Header Enable

A GET /Single request means that

the device sends the configured name and IP address of the
device in addition.

Apply Time zone

Local time is used. This means that the de-

vice calculates the entered offset to GMT. If this function is
disabled, no offset is used.

Apply Summer time

Activates summer time (daylight saving

time). This function works only in conjunction with

Apply Time

zone.

Apply Time Server

Activates the use of a time server for set-

ting the time of day. Enter at least one time server so that this
function will work.

Startup

selects the page which will be displayed as default

when using the web browser.

Summary of Contents for 57601







































































Search results

Summary of Contents for 57601

Reviews:

Related manuals for 57601

Brands by name

Popular brands

Wiesemann & Theis 57601, Manual

Search results

Summary of Contents for 57601

Reviews:

Related manuals for 57601

Brands by name

Popular brands