8 |
Web interface of the access point
26
Wieland Electric GmbH | BA001098 | 09/2016 (Rev. A)
Adapt the parameters of the interface configuration to the requirements of your network.
The ESSID, mode and network parameters may be found in the
General Setup
.
The
wienet-AP
has a factory preset as ESSID.
The
Mode
of the access point in the interface configuration controls the operating mode of the device. The
factory-set mode is
Access Point
in a network with the LAN interface. Various scenarios for the access point
operating mode are shown in Chapter 7 Scenarios for the use of the access point
Depending on the operating
mode, you must also adjust the
Network
parameter accordingly.
The WMM mode (Wi-Fi multimedia) is an expansion of the WLAN standard in order to improve the wireless
transfer of multimedia content and IP telephony. The WMM mode is activated as a default setting.
The Section
Wireless Security
allows you to change the encryption method for the WLAN and the code for
access to the WLAN (password). The factory setting for the WLAN encryption is
WPA2-PSK
, while the
password is
wienet123
.
You can optionally list the MAC addresses of devices permitted to have WLAN access or blocked in the
MAC
filter
section.
When using a MAC filter, you may lose your access to the access point, as the MAC
address you need may no longer be accepted in the event of a wrong configuration.
NOTE
