All information, illustrations and specifications in these Operating Instructions are based on the latest information
available at the time of publication. We reserve the right to make design changes at any time without prior notification.
40
8.0. Maintenance
8.4. Cleaning
Clean the verticutting tines
on a regular basis. This
lengthens the service life of
the components and, in the
process, you discover loose
components, wear and areas of
unwanted corrosion.
NOTE:
Do not bring plastic and
sealing elements in contact
with aggressive fluids (e.g.
carbon tetrachloride, tri,
benzene, caustic solutions,
acids etc.).
Bind drops of oil with a
binding agent and dispose of
it according to the
regulations. Eliminate the
cause. Only use wire brush and
caustic solutions in case of
emergency.
Auxiliaries and application
When performing cleaning work,
the installed machine must
always be lowered to the
ground.
Cleaning with water
All dirty parts, but use
caution:
water causes rust.
Cleaning with dry cloth
All inspection glasses, signs
and labels
Cleaning with compressed air
Exercise caution when using
compressed air. Put on safety
glasses! Without safety
glasses you risk eye injuries!
Furthermore you blow dirt into
the guides and bearings. For
this reason, avoid this
cleaning method.
