All information, illustrations and specifications in these Operating Instructions are based on the latest information
available at the time of publication. We reserve the right to make design changes at any time without prior notification.
29
4.0. Connecting to the Tractor
4.4. Raising the parking support
Raise the attached equipment
slightly from the ground.
Release the spring clip.
Remove the locking pin (A).
Swivel up the parking support
(B) and peg it using the
locking pin (A).
To fix the locking pin in
place, insert the spring clip.
4.5. Connecting hydraulics
The hydraulic system is
connected to the hydraulic
sockets on the rear of the
tractor.
If your tractor is not
equipped with such a socket,
please contact your dealer.
Avoid tight bends and chafing
of the hydraulic lines.
