All information, illustrations and specifications in these Operating Instructions are based on the latest information
available at the time of publication. We reserve the right to make design changes at any time without prior notification.
20
2.0. Assembly
2.5. Mounting the strain relief kit
ATTENTION DANGER!
The machine shall be set down
on an even, secure surface for
the mounting of the strain
relief kit.
Remove the screw, spring circlip
and nut. The removed washer will
be replaced.
Secure the tension spring with
long eye bolt (C) from the
outside, instead of the removed
screw on the right, with washer,
spring circlip and screw
(see figure 523.14).
Secure the tension spring with
short eye bolt (D) from the
inside, instead of the removed
screw on the right, with washer,
spring circlip and screw
(see figure 523.15).
The adjustment process is
described in section 6.4.
