All information, illustrations and specifications in these Operating Instructions are based on the latest information
available at the time of publication. We reserve the right to make design changes at any time without prior notification.
17
2.0. Assembly
2.3. Fitting the Verticut Harrow to the main frame
Attach the main frame to the
tractor (see section 4.2.).
Insert the rear parking support
in the top position and secure
it.
Position the left Verticut Harrow
behind the main frame on the
left-hand side.
Remove the securing components
from the front before fitting the
Verticut Harrow to the main
frame.
Align the hole pattern for the
six bolts with the hole pattern
on the main frame.
Only tighten the fixing bolts by
hand.
Secure the right-hand Verticut
Harrow to the main frame in the
same way.
Connect the hydraulic line to the
tractor.
Raise the Verticut Harrow from
the floor by actuating the
hydraulic control block on the
tractor.
Activate the safety locking
mechanism on the hydraulic
cylinder (see section 5.2.).
Fully tighten all of the fixing
bolts to create a solid
connection with the main frame.
