Ku nst sto ffschweißtec hni k
Starting and operating
Chapter 5
25.11.11
Working Instructions WIDOS 7000 WM
page 37 of 98
5.4. SD card and drive
The SPA 600 can be optionally equipped with a drive for a SD card.
The apparatus then stores the welding data in the internal memory as well as on the SD card if
a card is in the drive.
On a card with 64 MB memory capacity, the welding data of about 32,000 weldings can have
place.
•
The SD card must be formatted with „FAT16“ before usage.
•
Insert the card with the arrow to the top and in direction of the arrow (socket side)
carefully
and with a low pressure into the reading unit.
•
The card can be read out with a WICON program (optional).
•
The card may not be bent, opened, overheated and become wet!
Please only use SD cards purchased from WIDOS. We will not be liable for
any cards from other manufactures!
5.5. USB card reader
You may read out the welding data onto a PC by the USB card reader.
Remove the card from the SD card drive of the ESI 4000.
Remove the rear cap and plug card
according to the image into the USB
card reader.
Remove the front cap and plug USB
card reader into the USB interface in
your PC.
As soon as the USB card reader has
been plugged, it appears as
removable medium in the drive list.
Open the W IDOS folder, there you will
find:
- W ICON2000 viewer for considering
and printing the welding data,
- working instructions for W ICON2000
viewer as PDF file.
