![widos 7000 WM Working Instructions Translation Download Page 14](http://html1.mh-extra.com/html/widos/7000-wm/7000-wm_working-instructions-translation_979319014.webp)
Ku nst sto ffschweißtec hni k
Safety rules
Chapter 2
25.11.11
Working Instructions WIDOS 7000 WM
page 14 of 98
2.8.3.
Risk of injury by noise
Noise exceeding 80 dB (A) may occur; during planing it is obligatory to wear ear
protection!
•
Ear protection is obligatory during drilling / planing!
2.8.4.
Danger of combustion by heating element and welding area
You can burn yourself, inflammable materials can be ignited.
The heating element temperature is heated up to more than
250 °C / 482 °F
!
•
Do not leave the machine with heated heating element unsupervised.
•
Do not touch the surfaces of the heating element.
•
Take enough safety distance to inflammable materials.
•
Do wear safety gloves.
2.8.5.
Danger of crushing
Heavy injuries can result from crushing:
•
upon opening / closing the clamping tools.
•
upon driving in and out the planer and heating element.
•
upon opening / closing the slides.
•
upon mounting the reducer inserts.
•
Do not touch in-between clamped pipes.
•
Do not touch into the clamping and swiveling area.
•
Do not stand or touch in-between the machine slides during welding.
•
In case of working inside the machine, the mains plug always has to be switched off and
secured against unauthorized activation.
•
Special attention with the rear area when driving back the planer.
2.9. Structural modifications on the machine
•
No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer. In case of disrespect the warranty or liability will expire.
•
Machine parts which are not in a perfect condition are to be immediately replaced.
•
Only use original
WIDOS
spare and wear parts.
•
In case of purchase orders please always indicate the
machine
number
!