Ku nst sto ffschweißtec hni k
Operating and indicating elements
Chapter 4
25.11.11
Working Instructions WIDOS 7000 WM
page 18 of 98
4.2.1.
Operator panel
No.
Denomination
Function
1
Display (Option)
- to display the necessary parameters (for welding and
programming).
- Two values can be displayed at the same time.
2
Buttons for operation
(Option)
- Drag pressure measurement;
- to set the pipe data and project number;
- to set the type of the machine;
- to print the welding data;
- Diagnosis menu;
- to reset to the previous item of the menu
3
Turning switch 0 / I
- to switch the heating element on <I> and <0> off
4
Temperature regulator
- to set the heating temperature
5
Joystick heating element
- Heating element
out of machine
- Heating element
into machine
6
Joystick Planer
- Planer
out of machine
- Planer
into machine
- Planer
rotate
(planing pipes)
7
Joystick (cylinder 1) left
clamping tool
- To open left clamping tool
- To close left clamping tool
- To clamp left clamping tool (option)
- To release left clamping tool (option)
8
Joystick (cylinder 2)
clamping tool (option)
- To open clamping tool
- To close clamping tool
- To clamp clamping tool (option)
- To release clamping tool (option)
1
2
3
4
5
7
8
11
12
14
13
15
16
17
9
10
6
