Description of product
Chapter 1
12.05.15
Working Instructions WIDOS 6113
Page 7 of 67
1.4.1.
Technical data
1.4.1.1.
WIDOS 6113 General data
Material which can be welded:
PP, PE
Pipe diameter range:
OD = 315 - 630 mm
Weight:
approx. 150 kg
Weight (without accessories):
500 kg
Feeding: CEE-32
A
Wire cross section:
4,0 mm²
Emissions
-
Noise exceeding 80 dB (A) may occur; during planing it is
obligatory to wear ear protection!
- When using the named pipe materials and when welding below
260°C no toxicant damp arises
Ambient conditions in the welding
area
-
take care for cleanness (no dust at the welding area)
-
If secured by an appropriate measurement that allowed conditions
for welding are indicated, it is possible to work in any outside
temperature condition as far as the welder is not constrained in its
manual skill.
-
avoid humidity, if necessary use a welding tent
-
avoid strong sun rays influence
-
protect from wind, shut the pipe ends
1.4.1.2.
Heating element
Power: 5,9
kW
Voltage: 400V
(+-10%)
Current:
26 A (+-10%)
Frequency: 50
Hz
Surface: non-stick-coated
Outside-
:
684 mm
Weight:
appr. 32 kg
Attached elements:
-
Electronic temperature control
-
Control lamps, on/off-switch
-
Connecting cable with plug
1.4.1.3.
Planer
Motor:
Three-phase alternating current motor
Power: 1.1
kW
Voltage:
400 V (+-10%)
Nominal current
3,5 A
Frequency:
50 Hz (+-10%)
Speed of motor:
appr. 140 rpm
Attached elements:
-
On/off switch
-
Connecting cable with plug
-
Locking device
Weight:
appr. 100 kg
