WIDOS
Einsteinstr. 5
Phone
++49 7152 9939 0
Wilhelm Dommer Söhne
D-71254 Ditzingen-Heimerdingen
Fax
++49 7152 9939 40
GmbH
website: http://www.widos.de email:
12.05.15
Working Instructions WIDOS 6113
Page 6 of 67
1.
Description of the product
This chapter gives important basic information about the product and its prescribed use.
All technical details of the machine are put together as a general arrangement.
1.1.
Usage and purpose-oriented use
The WIDOS 6113 has been designed for the heating element butt welding of pipes and fittings with a
diameter range of Ø = 315 - 630 mm.
(standard diameters: 315 / 355 / 400 / 450 / 500 / 560 / 630 mm)
It is a machine for construction sites and particularly designed for the usage on-site, as well as in the
workshop.
For this reason, the frame is kept small so that it can be used even under difficult conditions (e.g. ditch).
All use going beyond is not purpose-oriented.
The manufacturer is not responsible for damages caused by misuse.
The risk is held only by the user.
Also part of the purpose oriented use is
respecting all the indications of the working instructions and
performing the inspection and maintenance work.
1.2.
Safety measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products standing
nearby can be damaged or destroyed.
Persons being in the endangered area may be injured.
Therefore these working instructions have to be thoroughly read and the corresponding safety regulations
must be necessarily adhered to.
1.3.
Conformity
The machine corresponds in its construction to the valid recommendations of the European Community as
well as to the according European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
1.4.
Designation of the product
The product is designated by two type labels which are attached at the aggregate and at the basic machine.
They contain the type, the serial number and the year of construction of the machine.
