Operating and indicating elements
Chapter 4
12.05.15
Working Instructions WIDOS 6113
Page 20 of 67
4.3.1.
Puller for heating element
There is a puller mounted between the movable and the
fixed clamping shells on the basic machine. It prevents
the heating element from sticking to the heated-up pipe
ends.
When inserting the heating element take care that it lies
in the diminution of the throat of the tear-off bar (see
arrow).
4.4.
Elements at planer and heating element
No. Name
Function
20
On/off switch for planer
- to switch the planer on/off.
- Switch off the planer after use.
21
Lever
- Lifting facility to put in / lift off the basic machine / the heat-
protected box
22
Eye and eye with locking bolt
- to lock the planer/ heating element- For holding the planer when
lifting/removing.
- Lever can be screwed off. in basic machine, (In order to remove
the planer, pull locking bolt into arrow direction.
23
Lifting screw
- to lift / insert the heating element / planer with the
lift-off device.
24
Display of temperature
-
Digital display of set heating element temperature. Three different
displays are possible.
For meaning of the displays please refer to point 5.6
How to set the heating element temperature
25
Thermostat
- to set the required temperature.
26 Grips
-
To hold the heating element when lifting / removing.
The basic machine / protection box
21
22
23
25
26
27
24
