Starting
and
Operating
Chapter 5
12.05.15
Working Instructions WIDOS 6113
Page 22 of 67
5.2.
Connection of hydraulic aggregate to basic machine
Put the hydraulic hoses of the basic machine into the quick-action couplings of the hydraulic aggregate in
order to weld (chapter: 4.1no: 10).
With open hydraulic aggregate:
Connect the mains plug of the planer to local socket, (CEE-16A / 400 V / 50 Hz, right-hand rotary field).
Connect the mains plug of the heating element to local socket, (CEE-16A / 400 V / 50 Hz).
Connect the mains plug of hydraulic aggregate to local socket, (CEE-32A / 400 V / 50 Hz Connect the mains
plug of the planer to local socket, (CEE 16A / 400 V / 50 Hz, right-hand rotary field).
With enclosed hydraulic aggregate:
Connect the mains plug of the planer to the hydraulic aggregate, (CEE-16A / 400 V / 50 Hz).
Connect the mains plug of the heating element to the hydraulic aggregate, (CEE-16A / 400 V / 50 Hz).
Connect the mains plug of the enclosed hydraulic aggregate to the local power supply (CEE-32A / 400 V /
50 Hz, right-hand rotary field)
Lay hydraulic and electric wires carefully (danger of stumbling).
Verify whether the hydraulic pump is connected clockwise!
5.3.
How to mount the lifting device (optional)
Detach the suspension bracket on the crane motor, put and fix the bracket to the lifting device with the
bolts and SL clips.
Put the lifting device through the upper holder from above and downwards to the lower support.
Suspension bracket
Holder above
Support below
