WIDOS
Einsteinstr. 5
Phone
++49 7152 9939 0
Wilhelm Dommer Söhne
D-71254 Ditzingen-Heimerdingen
Fax
++49 7152 9939 40
GmbH
website: http://www.widos.de email:
12.05.15
Working Instructions WIDOS 6113
Page 16 of 67
4.
Operating and indicating elements
4.1.
Elements on open aggregate (optional)
No. Name
Function
1
Push-button
- By pressing the push-button the motor switches over to high
speed
2
Valve lever
Opening the slides. There are 4 different positions:
- forwards: slides close.
- in the middle (usual position): the pressure which is currently
achieved is kept (also by means of the built-in hydraulic
accumulator)
- Pressure release: (depressurized position):
a possibly existing pressure is released without moving the
slides. Due to the hydraulic accumulator, it takes about 10 s
until the pressure is completely released.
- backwards: slides open
3
Setting screw for pressure
relief valve
- Limitation of the pressure to the desired value.
4
Hydraulic connections for
opening / closing the slides
- Non-dropping quick-acting couplings
5
Connecting cable with plug
CEE-32 A
- connection to power supply
6
Pressure gauge
Display of the hydraulic pressure
7
Screw with oil dipstick
- to determine the oil level
- oil filler neck
You may run the machine quickly in order to drive the slides back and forth as well as for the
change-over by:
Pressing <button> (Nr. 1) and <control lever> on „FORWARDS“ or „BACKWARDS“.
In order to carry out planing and for the joining you must select the slow speed:
With <control lever> on „FORWARDS“ or „BACKWARDS“ without pressing <button>.
1
2
3
4
5
6
7
