Widinovations Widlaser C500, User Manual

Page: 6 / 41

widinovations Confidential ©
6|41
V
3.3
2. Safety principles and instructions
At the time of the machines development and production, it was built in accordance with prevailing
technological regulations and therefore conforms to industry safety standards.
However, hazards may arise should the machine be operated by untrained personnel, used improperly or
employed for purposes other than those it was designed for.
This chapter provides an overview of all-important safety considerations necessary to optimize safety and ensure
the safe and trouble-free operation of the machine.
Other chapters of this manual also contain specific safety instructions.
Signs, labels and pictograms affixed to the machine must be kept visible and must not be removed.
Important safety instructions in this manual are marked with symbols. These instructions for work safety must be
followed. In all these particular cases, special attention must be paid in order to avoid accidents, injury to persons or
material damage.
WARNING!
Risk of injury or death
This symbol marks instructions that must be followed in order to avoid harm to one's health, injuries, permanent
impairment or death.
ATTENTION!
Risk of material damage
This symbol marks instructions which, if not observed, may lead to material damage, functional failures and/or
machine breakdown.
WARNING!
Danger electric current
This symbol warns of potentially dangerous situations related to electric current. Not observing the safety
instructions increases the risk of serious injury or death. Care is to be taken in particular during maintenance and
repair work.
WARNING!
Danger laser beam
This symbol warns of potentially dangerous situations related to the laser beam. Not observing the safety
instructions increases the risk of serious injury.
NOTE
This symbol marks tips and information which should be observed to ensure efficient and failure-free operation of
the machine.