Widinovations Widlaser C500, User Manual

Page: 5 / 41

widinovations Confidential ©
5|41
V
3.3
1. Overview
1.1. Introduction of the machine
The widlaser C500 is a high-quality CO2 laser machine. The CO2 laser tube means that the system has long life-
cycle. The machine with a CleanProtect® design guaranties minimal maintenance costs with the maximum
performance. The combination of a high-quality CO2 laser tube, with the high-quality and high-speed mechanical and
electronic components, guaranties highest speeds with the highest quality. Together with the user-friendly software
and interface, provides a flexible and productive laser cutting and engraving solution of the highest quality standards
1.2. Introduction of the manufacturer
Widinovations, lda, is the manufacturer of the widlaser C500. We thank you for choosing our laser system We
believe you will be very pleased with our machine. The following information will guide you, through the fast and safe
way to use your new laser machine.
Here are some things to keep in mind before starting to use the machine.
1.3. Packaging inspection
Unless otherwise agreed, the machine is delivered in a wooden case.
CAUTION
During transport the transport case can slip, tip or fall over.
Always secure the transport case and take into account the center of gravity of the box.
Upon arrival, inspect the delivery to ensure that it is complete and has not suffered any damage. If any transport
damage is visible, do not accept the delivery or only accept it with reservation. Record the scope of the damage on the
transport documents/delivery note. Initiate the complain process. For all defects that are not discovered upon
delivery, be sure to report them as soon as they are recognized as damage claims must be filed within a certain
period, as granted by law.