Widinovations Widlaser C500, User Manual

Page: 21 / 41

widinovations Confidential ©
21|41
V
3.3
4.2. Installation environment
The installation of the widlaser C500, must be done in a clean, dust free and temperature stable environment. It is
also mandatory that the installation local has no vibration and no electromagnetic interference.
The operating temperature range is, 10-35 ºC.
The humidity range is from 30% to 85%, non-condensing.
4.3. Exhaust and refrigeration system
The widlaser C500, includes a dust and smoke exhaust system.
The exhaust inlets are located behind and below the table (as shown in the images below)
Keep in mind that the inlets must be periodically cleaned, as indicated in the maintenance chapter.
The widlaser C500 ventilation inlets is located on both the left and right side of the machine, as the images below
illustrate:
The ventilation inlets must be kept free and uncovered, to allow the system to operate properly.
Keep in mind that this system needs to be cleaned periodically as indicated in the maintenance chapter.