7
(e)
If you would like to remove a custom mode, use the following procedure:
1. Click on the
Add Resolution
button. This will bring you to the
Custom Resolution Control Center
.
2. Select the resolution you would like to remove. (Note: You may NOT remove the predefined modes. Only modes
marked "(custom)" may be removed.)
3. Click on the
Delete
button.
4. Click the
OK
button to return to the main Metabyte Wicked3D display property sheet.
Custom Refresh Rates
Metabyte's Re2Flex technology also allows you to customize the refresh rates used in your 3D environment in 1 Hz
increments. You may select a refresh rate using any of the following methods:
•
Moving the slider bar to the desired refresh rate.
•
Typing in the desired refresh rate in the refresh rate window.
•
Using the increment and decrement arrow buttons on the side of the refresh rate window.
Warning: Different monitors have different mode capabilities. Use the Test Mode button to test custom modes before
using in actual games. If you get a blank screen, or the image is incorrect, reduce the refresh rate then test again.
Figure 2: Metabyte Wicked3D Display Properties sheet.
Figure 3: Custom Resolution Control Center