8
(e)
Testing a mode
It is important to test a mode prior to saving your mode configuration. Using the
Test Mode
feature will assure you the
mode is safe to use in your 3D environment. When you click the
Test Mode
button, you will get the following dialogue box:
Figure 4: Test Mode warning dialogue box
After clicking OK, you should get a screen, which the letters spelling "Wicked3D" will float around. The mode you are testing
will appear at the bottom right corner of the test screen. If the mode is not centered, we recommend you use your monitor
controls to adjust the image. If your monitor does not have this capability, you may use the software controls provided in the
test screen to adjust the image.
Figure 5: Test Mode screen.
Once you have verified the desired mode works correctly, hit the <Esc> key. If the mode does not display properly, lower
the refresh rate and try the test again.
Figure 6: Test Mode exit warning
