Step 21
– Cut small slices ¾ through the foam to install the stand-offs as shown above. Make
sure that they line up with the push rod so that the rod does not bow excessively. The back
stand-offs for the rudder is on the vertical fuse and the front one is on the horizontal fuse . On
the elevator push rod both stand-offs will be on the horizontal fuse.
Step 22
–
Hook up your radio and ESC per the manufactures instructions. Temporally place
at either side of the fuselage as shown. Note how I routed the battery connector through a
small slit in the EPP to the top of the fuselage where I will mount my battery. Don't attach your
RX or ESC to the fuselage yet, we may need to move them to get the COG correct.
