![background image](http://html1.mh-extra.com/html/wia/blue-fx/blue-fx_user-manual_978591013.webp)
11
5-2. Replacing the Inside Lens Cover
2
3
4
1
Never use the
auto-darkening lens
without the inside and
outside lens covers
properly installed. Welding
spatter will damage the
auto-darkening lens and
void the warranty.
1.
Auto-Darkening Lens
Retainer Clips.
2.
Auto-Darkening
Lens Assembly.
3.
Auto-Darkening
Lens Retainer.
4.
Inside Protective
Lens (Clear).
Place helmet upside down
on a flat surface.
Adjust or remove headgear
to improve access to lens
assembly.
Gently release the top and
bottom auto-darkening
lens retainers located
inside the helmet. Lift out
auto-darkening lens
assembly.
Gently remove auto-
darkening lens assembly
from retainer by releasing
the four tabs.
Remove inside protective
lens at the marked
locations and replace with
new lens.
> Use the rubber gasket
to keep weld spatter
away from the
auto-darkening lens.
Summary of Contents for BLUE FX
Page 19: ...17 Notes...
Page 20: ...welding com au 1300 300 884 235663 ISS 1 JAN 2017...