13
Section 6 - Replacing the Battery
Section 7 - Installing Optional Magnifying Lens
Section 8 - Maintenance
1. Battery Cover
Remove battery by turning
battery cover counter clockwise.
Replace with CR2450 lithium battery.
WIA recommend using the Panasonic
battery, as the side edge and shoulder
are straight and provide good connection
to battery terminals. Battery is available
as spare part number 217043
> Be sure positive (+) side of the battery
faces up (toward inside of helmet).
1. Optional Magnifying Lens
Release lower lens retainer clip.
Starting at the bottom, slide magnifying
lens into the helmet retaining brackets.
Align the magnifying lens with the
auto-darkening lens assembly.
Reverse procedure to remove
magnifying lens.
>
To prevent lens fogging, install
flat side of magnifying lens toward
auto-darkening lens.
NOTICE:
Never use solvents or abrasive cleaning detergents.
NOTICE:
Do not immerse the lens assembly in water.
The helmet requires little maintenance, however for best performance clean after each use.
Using a soft cloth dampened with a mild soap and water solution, wipe the cover lenses
clean. Allow to air dry. Occasionally, the filter lens and sensors should be cleaned by gently
wiping with a soft, dry cloth.
1
GRIND
ON
WELD
LOW
BATTERY
SENSIT
IV
IT
Y
DEL
AY
MAX
HI
LO
SHADE
MIN
1
Summary of Contents for BLUE FX
Page 19: ...17 Notes...
Page 20: ...welding com au 1300 300 884 235663 ISS 1 JAN 2017...
