WIA BLUE FX, User Manual

Page: 12 / 20

10
5
4
3 2
1
Section 5 - Replacing the Lens Covers
5-1. Replacing the Outside Lens Cover
Never use the
auto-darkening lens
without the inside and
outside lens covers
properly installed. Welding
spatter will damage the
auto-darkening lens and
void the warranty.
1.
Auto-Darkening Lens
Retainer Clips.
2. Auto-Darkening
Lens Retainer.
3. Auto-Darkening
Lens Assembly.
4. Outside Protective
Lens (Clear).
5. Gasket.
Place helmet upside down
on a flat surface.
Adjust or remove headgear
to improve access to lens
assembly.
Gently release the top and
bottom auto-darkening lens
retainers located inside the
helmet. Lift out auto-
darkening lens assembly.
Hold assembly and press
outside lens and gasket
from front. (Assembly comes
out through the back of the
helmet).
Replace clear lens with
new lens (Reuse the
rubber gasket).
> Use the rubber gasket to
keep weld spatter away
from the auto-darkening
lens.
Reinstall new outside
protective lens with gasket
and reinstall auto darkening
lens in the plastic lens
retainer.
Reinstall the retainer
and secure the top and
bottom lens retainer clips.
> The outside lens
gasket must be
correctly installed for
maximum lens
protection.